Making way for ALL NEW SHOWS!

Doug Henning's Water Levitation
John Gaughan

Doug Henning's Water Levitation
John Gaughan

This is what started it all. Doug Henning's original water levitation made by Johnny Gaughan 1979 as seen on World of Magic T.V. Special - 2 and Broadway Show Merlin. Complete with Doug's Rainbow stickers and brought back to the original state by Criss Angel studios. Operate just like when Doug used it. With Doug's fire hoop, assistant harness, original control station and controls, stairs. Comes with exclusive world-wide rights from Doug Henning

Condition: Good

ITEM# 1001

Video(s):
youtube.com/watch?v=BDkYIhCGrbw

Doug Henning's Original Kiddie Car Levitation
John Gaughan

Doug Henning's Original Kiddie Car Levitation
John Gaughan

The only one of its kind! An original Doug Henning actual prop, then purchased and performed by Lance Burton's and signed to Criss from Lance. Criss Angel performed it on the Mindfreak television series and with his son Johnny Crisstopher in 1095, a documentary short film to be released in 2021 about Pediatric Cancer. Owned by three generations of the most famous magicians in Magic's history and now it's available for your performance or collection. Comes complete with papers, square hoop, Lance's sign, road case and everything needed to perform immediately. Used in Doug's last tour and Lance used this in the Monte Carlo and on tour in Japan

Condition: Very Good

ITEM# 1002

Doug Henning Floating Ball and Candle Rig
Willie Kennedy

Doug Henning Floating Ball and Candle Rig
Willie Kennedy

Originally featured on “World of Magic II,” Doug Henning transformed this illusion to a signature piece. This is a duplicate of the same system used by Doug, built to spec by Willie Kennedy who originally built Doug's. This is the complete system!

Condition: Excellent

ITEM# 1003

Video(s):
youtube.com/watch?v=DCGNaiu6cpM

Criss Angel Chopper Appearance
Criss Angel Studios / Big Bear Choppers

Criss Angel Chopper Appearance
Criss Angel Studios / Big Bear Choppers

Criss' desire was to create the ultimate motorcycle appearance period! Not only was that mandate accomplished but a mentalism routine was born, that allowed a random audience member to examine the entire area and select which one of the eight choppers that appeared while they were just feet away with an assistant sitting on it. This happens instantly appearing fast and in truly impossible conditions. This is one of Criss' signature routines performed in his Vegas show for years, on tour and on his television series Mindfreak. Forget about those fake looking bikes. This is the real deal and Criss spared no expense and he and his team spent countless hours developing it over years. Includes 9' chrome chopper, display table, gimmick, projection panels, rights to Criss' creation and routine and methods and technologies that will blow your mind.

Condition: Very Good

ITEM# 1005

Hanging Appearance Cage
Willie Kennedy / Criss Angel Studios

Hanging Appearance Cage
Willie Kennedy / Criss Angel Studios

This incredible illusion combines the "mid air tiger appearance" with a built in load space to hide an assistant for an amazing, fast transformation. Using the latest technology, LED lighting and a custom fabricated Kabuki solenoid system, this illusion has it all and is ready for a Vegas stage! It was originally designed for a Girl to Monster appearance, but can easily be substituted for a large Cat or 1-2 assistants. One of the side panels is equipped with laser-cut breakaway glass, so it could be put back together nightly and allows for your "monster" to escape. (The glass could easily be exchanged for a solid piece if desired)

Condition: Very Good

ITEM# 1008

Cups and Balls
Criss Angel Studios

Cups and Balls
Criss Angel Studios

Criss created and wrote this killer comedy piece for his Vegas show and for his tours. Can be sold with rights for the entire routine or without. Includes 4 cups, deceptive steps, platform

Condition: Very Good

ITEM# 1010

Rubber Room Illusion
Willie Kennedy

Rubber Room Illusion
Willie Kennedy

This illusion provides a plethora of creative opportunities which Criss will share with you... Have one girl transform into another as Criss did on the Mindfreak television series or have two girls appear from perplexing conditions. VERY DECEPTIVE and a great illusion to make your own as the entire cube can also grow about 8 inches. Comes with five flame throwing spears and a front and back cover. This is a one of a kind, original illusion from the mind of Criss Angel.

Condition: Very Good

ITEM# 1012

Kiosk Illusion
David Mendoza / Criss Angel Studios

Kiosk Illusion
David Mendoza / Criss Angel Studios

An assistant, transforms into a dog/leopard in a split second or whatever else that fits into the secret load chamber. Featured in Criss's live show in Vegas for years and on tour. A beautiful deceptive illusion that produces big audience reactions. The pedestal has been upgraded with custom RGB LED lighting and also made larger so you no longer need a trap door to perform this incredible illusion.

Condition: Very Good

ITEM# 1013

Walking Legs
Criss Angel Studios

Walking Legs
Criss Angel Studios

By far the best and most deceptive legs in the business. Performed live in Criss Angel's Las Vegas show and tours. Fabricated by Criss Angel Studios they spared no expense, with many vital features that catapults this illusion for today's audience. Includes a custom torso built by a Hollywood SFX designer and adjustable leg heights to fit most assistants. Road case included.

Condition: Very Good

ITEM# 1014

Flambe
David Mendoza / Criss Angel Studios

Flambe
David Mendoza / Criss Angel Studios

Fire erupts from an elevated platform, transforming into a magician or an assistant that appears instantly. A spectacular piece beautifully made by David Mendoza and revised by Criss Angel Studios. Fire, cloth and road case included. Purchased from Kirby Van Burch with the performance rights, the original inventor of this incredible illusion.

Condition: Very Good

ITEM# 1015

Kiddie Car Levitation
Criss Angel Studios

Kiddie Car Levitation
Criss Angel Studios

Created for one of Criss's tours. This is a radio-controlled car that stops for gas and begins to levitate up to the magician's waist. The gas pump is moved to prove nothing is holding the car and a square hoop is passed over it while it is floating. The car lowers to ground and drives away. Includes road case, car, radio-control, gas pump, platform.

Condition: Very Good

ITEM# 1016

Dog Blendo
EDF / Criss Angel Studios

Dog Blendo
EDF / Criss Angel Studios

Two dogs - a black one and a white one blend together into a single black & white dog. Based off of Doug Henning's illusion featured on his TV special where a black horse and a white horse blend together into a zebra. Reworked by Criss Angel Studios, this illusion looks stunning on stage and is ready to tour. 2 Road cases are included.

Condition: Very Good

ITEM# 1017

Dying Rose
Mike Michaels

Dying Rose
Mike Michaels

Criss performed this for a RAW tour. Each rose pedal falls until just the stem is left WITHOUT TOUCHING IT. The Rose restores itself WITHOUT TOUCHING IT. Includes Table, vase, roses, remotes and rights from Criss Angel.

Condition: Very Good

ITEM# 1018

Matrix Illusion
John Gaughan

Matrix Illusion
John Gaughan

An original piece by John Gaughan that Criss used on an episode of Mindfreak the television series. Criss jumped into Joaquin Ayala's torso and vanished while Ayala was on stage performing and then Criss instantly reappeared in the audience at the Magic Castle.

Condition: Fair

ITEM# 1019

Splashes Levitation
Splashes (Bob North)

Splashes Levitation
Splashes (Bob North)

Built by Bob North of Splashes, this version of their signature levitation was designed to be buried underground. This was used on Criss Angel Mindfreak, Season 1.

Condition: Very Good

ITEM# 1020

Luggage Cart Appearance
Criss Angel Studios

Luggage Cart Appearance
Criss Angel Studios

A person appears instantly in impossible conditions. Very deceptive with many great options of presenting as Criss did live on stage in Las Vegas, on tour and on his Mindfreak television series. This illusion was built to tour and made to pack flat. (includes everything needed to perform including foulard, suitcases appearance cloth, road case and performing rights).

Condition: Very Good

ITEM# 1021

Dryer Fluffer
Criss Angel Studios

Dryer Fluffer
Criss Angel Studios

A small dog is placed inside of an empty shown dryer (an assistant can come out of the dryer to show it is empty). After the small dog is placed inside, it apparently spins and when done the dog exits the dryer three times its original size. (Note: dogs are never in any danger). Dog can be substituted with other non-life objects. Road case included and rights.

Condition: Very Good

ITEM# 1022

Saw
Criss Angel Studios

Saw
Criss Angel Studios

A menacing five foot saw blade that spins and can moved around easily. Was used in Criss's live Vegas show for years, on tour, on the Mindfreak television series and also going way back to Criss's second television special Supernatural. A great prop for cutting in half, Halloween attraction or movie props. Characters can ride on it too.

Condition: Very Good

ITEM# 1023

Kennel Escape
Mark Cannon / Cannon's Great Escapes

Kennel Escape
Mark Cannon / Cannon's Great Escapes

This escape caused both of Criss's eardrums to be blown as captured on an episode of Mindfreak. For the avid collector or the escape artists

Condition: Good

ITEM# 1026

Asrah Forms
David Mendoza

Asrah Forms
David Mendoza

3 various types of Asrah forms custom made in different poses. Criss spared no expense to make the best and most realistic forms available, used by Criss for years in his Vegas show. These are back-ups and brand new.

Condition: Very Good

ITEM# 1027

Crystal Casket
Owens Magic

Crystal Casket
Owens Magic

A displayed illusion directly from Criss's personal office. Great for a production of a person or two. Comes with a road case.

Condition: Good

ITEM# 1028

Wheel Chair Illusion
Joe Panero

Wheel Chair Illusion
Joe Panero

This is a great original piece featured in Criss's live Vegas show for a decade. An incredible way to appear, disappear or transform from one person to another. The chair electronically spins under your control. A great collectors piece and one-of-a-kind revelation.

Condition: Very Good

ITEM# 1029

Zig-Zag Illusion
Chalet

Zig-Zag Illusion
Chalet

A beautiful display piece from Criss's office which he shot with Shaunyl as a fun social media post. Criss performed the Zig-Zag at 14 and it always had a special place in his heart after seeing Doug Henning perform it. This is for the illusion worker that wants a classic piece of magic's history.

Condition: Very Good

ITEM# 1030

Authentic Hospital Gurney Escape

Authentic Hospital Gurney Escape

This real gurney was used for a wet blanket strap escape on an episode of Mindfreak. Great foundation for an original escape or a great prop for a Halloween attraction.

Condition: Very Good

ITEM# 1031

Doves to Rabbit
Chalet

Doves to Rabbit
Chalet

Criss purchased this piece because it was just like the one, he performed at 14 years old in all of his shows. This one like his original was fabricated by Chalet. Comes on removable stand.

Condition: Good

ITEM# 1033

2008 Lamborghini Mucielago 640

2008 Lamborghini Mucielago 640

An exact duplicate of the body and rims of Criss Angel's famous Lamborghini Mucielago 640 featured on episodes of Mindfreak and countless TV shows and magazines. It literally "appeared" every night in Criss Angel Mindfreak at Planet Hollywood in 2019.

*Please note: No engine or interior*

ITEM# 1208

Video(s):
https://youtu.be/fBA7CVlDSV4

Double Sawing
David Mendoza

Double Sawing
David Mendoza

Two girls wearing different costumes (red and blue) are cut in half and then separated. The boxes accidently get put back together with the opposite color halves, so when each girl is put back together and exits the illusion, her legs have changed place with the other assistant and she is now wearing the opposite costume on her lower half! Costumes not included. In great condition with thighs, RC feet, stocks, blades and internal LED lighting. Performance rights received from Doug Henning.

Condition: Very Good

ITEM# 1038

Windshear
Bill Smith / Taylor Reed

Windshear
Bill Smith / Taylor Reed

Criss performed this on the rooftop at Luxor on his Mindfreak television series. Has touches that make it look much more realistic and industrial looking. Comes with built in lighting. Restored for stage performances and ready to go with road case.

Condition: Good

ITEM# 1039

Double Levitation
Willie Kennedy

Double Levitation
Willie Kennedy

A magician and the assistant can levitate independently 10'. Great design and made very, very well. Believed to have been fabricated by Willie Kennedy

Condition: Very Good

ITEM# 1040

Single Levitation
Unknown

Single Levitation
Unknown

A Levitation used to levitate either an assistant or the magician himself 10' into the air. Comes with road case. Levitation arm can easily be swapped out for various harnesses for different illusions.

Condition: Very Good

ITEM# 1041

Motorcycle Vanish
Unknown

Motorcycle Vanish
Unknown

Used on Mindfreak television series. Criss and his GXR motorcycle vanished from this cage while hanging from a crane. Can use most motorcycles and some quads as well for the vanish. Motorcycle NOT included.

Condition: Good

ITEM# 1042

No Feet Illusion (EDF)
EDF

No Feet Illusion (EDF)
EDF

Performed by Criss on the Mindfreak television series. Both of Criss's feet vanished outside and surrounded by a crowd at the Luxor. This can be performed solo without assistants because the gimmick is cleverly hidden from your audience.

Condition: Good

ITEM# 1044

Double Flip-Over Trunk
David Mendoza

Double Flip-Over Trunk
David Mendoza

After two cases are shown empty - produce an assistant, a panther, two assistants, whatever you want! Beautifully fabricated by David Mendoza. Can be performed surrounded! Purchased from Kirby Van Burch.

Condition: Good

ITEM# 1045

Owens Levitation
Owens Magic

Owens Levitation
Owens Magic

Staircase, Levitation Arm and Harness only. Magician must supply the platform. Levitation is variable speed and goes 3'6" high.

Condition: Very Good

ITEM# 1046

Stretcher
Bill Smith

Stretcher
Bill Smith

The assistant enters the stretcher tube and the doors are closed. Her hands, feet, and head are visible in the 5 slots around the tube. From there, the magician is able to move her neck, wrists, and ankles independently, making the assistant stretched to impossible conditions. The limbs are then restored and the assistant emerges unharmed. Purchased from Kirby Van Burch.

Condition: Good

ITEM# 1047

Twister
Bill Smith

Twister
Bill Smith

The magician places his assistant inside a contraption with a box covering her middle and a second box covering her head. Her feet remained exposed throughout the illusion. The magician then opens the front of the box covering her head and twists the head of his assistant making multiple revolutions. After this, he opens the front of the cabinet and shows that her middle section (clothes and all) has now become twisted in a small, slim line. The process is reversed and the assistant emerges unharmed. Comes with the option to use a wig for a more convince head twist or to have the back of the head box covered.

Condition: Good

ITEM# 1049

No Feet Illusion
Bill Smith

No Feet Illusion
Bill Smith

Made famous by Doug Henning. One leg vanishes, then the other and then they both vanish. Can be spun 360 degrees. Performance rights received from Andre Kole.

Condition: Good

ITEM# 1050

Snow Storm Speakers
Kevin James

Snow Storm Speakers
Kevin James

Two custom made stage monitors hide and disguise both VERY powerful motors that produce the biggest snowstorm clouds in two different locations on stage or in the audience. Includes 2 snow storm systems and snowstorm packets to get you going.

Condition: Very Good

ITEM# 1051

Where The Ducks Go?
Unknown

Where The Ducks Go?
Unknown

A great version of the duck vanish and each piece of the box is placed upon the cage making the illusion even more deceptive. The duck reappears in the duck previously shown empty bucket. Comes with all pieces and is ready to perform

Condition: Very Good

ITEM# 1053

Card Shooters
Tom Yurasits

Card Shooters
Tom Yurasits

8 Custom-made card shooters designed to work in series to shoot cards 5-6' high from a single control button offstage. Comes complete with a road case and battery chargers.

Condition: Very Good

ITEM# 1058

Break-Away Bird Box
Unknown

Break-Away Bird Box
Unknown

Condition: Good

ITEM# 1059

Appearing Bird Cage
Unknown

Appearing Bird Cage
Unknown

Large Production Bird Cage (SS) 13" Diameter, can hold real dove or multiple smaller birds.

Condition: New

ITEM# 1060

Clay Paky Alpha Spot HPE 1500
Clay Paky

Clay Paky Alpha Spot HPE 1500
Clay Paky

This 1500 W moving head is the most impressive graphic effects spotlight available, with an incredible array of colour and imagery devices, including 20 gobos on 3 wheels, animation disc, rotating prism and the exclusive Automated-Star-Gobo (patent pending). All devices are fully combinable with limitless rotation and morphing possibilities. The zoom has an extreme aperture range from 7degreee to 57degree (1:8 ratio) with an amazing 120 bpm speed. An auto-focusing function combined with the Dyna-Cue-Creator make programming and operation easy and creative. A special high definition iris, the advanced Zoom-Tracking-Diffuser and silent operation position Alpha HPE 1500 at the edge of show-lighting technology. (Road Cases available for a separate fee )

Qty: 6

Condition: 6 VG

ITEM# 1108

Clay Paky Mythos
Clay Paky

Clay Paky Mythos
Clay Paky

Mythos is a highly advanced form of hybrid light: first of all, it is an excellent 470 watt-lamp spotlight, which produces an outstanding large light beam, featuring a zoom that ranges from 4degree to 50degree (1:12 ratio). Light beam is sharp, with perfectly defined edges, from the first millimeters after the front lens right along its entire length. The zoom is optimized for focusing, which is separate from that of the fixed and rotating gobos. Its movements are smooth, fast and very quiet. Mythos also features a completely redesigned indexed visual effect disc, which may be superimposed on all the gobos, both in and out of focus. But Mythos is also an extraordinary beam light, allowing you to switch to a minimum fixed beam angle of just 2.5degrees. A large, very dense, 160 mm-diameter light beam leaves the Mythos's front lens and remains parallel for its entire length even at great distances. Mythos is a very versatile tool, which is useful in any situation and therefore an excellent investment.

Qty: 9

Condition: 1 New, 8 VG

ITEM# 1109

HES - SolaHybeam 1000
High End Systems

HES - SolaHybeam 1000
High End Systems

A companion hybrid fixture to the SolaSpot 1000, the SolaHyBeam 1000 is lightweight and compact, yet offers punchy output and unprecedented effects for small to mid-sized venues. Utilizing a 440-watt Bright White LED source, the fixture features a unique wash/beam optical design, fixed color wheel plus CMY/CTO system and a rotating animation gobo wheel. Includes Road Case

Qty: 1

Condition: New

ITEM# 1111

HES - SolaHybeam 2000
High End Systems

HES - SolaHybeam 2000
High End Systems

Built for the largest lighting applications, the flagship SolaHyBeam 2000 luminaire offers high-intensity output that can outperform even the most powerful 1500W arc-source instruments. The SolaHyBeam 2000 uses a 600W Bright White LED engine, multiple color and effects systems. Combined with High End's wash/beam optical design and an incredibly versatile zoom range, it results in revolutionary new lighting looks. Includes Road Case

Qty: 2

Condition: New

ITEM# 1112

Sabor Light
AG

Sabor Light
AG

Sabor Lights are a 60W moving light fixture designed to emit a powerful, single beam of light.

Qty: 2

Condition: Good

ITEM# 1113

Colorram IT 87110 Scroller
Wybron

Colorram IT 87110 Scroller
Wybron

The Coloram IT color changer uses scrolling gelstrings (up to 32 frames) and attaches to almost any light fixture available, providing vibrant color options for any production.

Qty: 6

Condition: Fair

ITEM# 1114

PS-600 FOR COLORAM IT
Wybron

PS-600 FOR COLORAM IT
Wybron

The power supply accepts DMX512 from a lighting console and passes it along with24VDC power to each device. This eliminates the need for separate control and power cables to each device. The DMX512 control signal can also be daisy chained to others power supplies or other DMX-controlled devices.

Qty: 1

Condition: Fair

ITEM# 1115

ETC Source Four Leko - 750W
ETC

ETC Source Four Leko - 750W
ETC

Source Four's revolutionary technology gives you a clean white beam for unequaled imaging, crisp pattern projection, and a bright, even field. These features combine to make the coolest beam available in an ellipsoidal- meaning gels, patterns, and shutters last longer and your performance space stays cooler. The Source Four Ellipsoidal is comprised of two main parts, the fixture body and the lens tube. Easily switch out the lens tube by hand to replace the beam angle from 90 degrees to 5 degrees. This listing is for a fixture body, your choice of a 19, 26, or 36 degree lens tube.

Available Lens Tubes:
3 @ 19 degrees
12 @ 26 degrees
3 @ 36 degrees

Qty: 18

Condition: Fair

ITEM# 1116

ETC Source Four JR 26 Degree
ETC

ETC Source Four JR 26 Degree
ETC

Source Four Junior 575 Watt Black Ellipsoidal Spotlight with 15 Amp Twist-Lock plug combines the energy-saving power of the patented HPL lamp, with a dichroic reflector and optical-quality lenses. Source Four technology provides a clean white beam for unequaled imaging, crisp pattern projection, and a bright, even field.

Qty: 2

Condition: Fair

ITEM# 1117

ETC Source Four Zoom Ellipsoidal 750W / 15 to 30 Degree
ETC

ETC Source Four Zoom Ellipsoidal 750W / 15 to 30 Degree
ETC

750W Ellipsoidal with 15 to 30 Degree Zoom Lens and Stage Pin Connector. With a zoom you only need one fixture to achieve a variety of field angles, and with Source Four Zoom it's easy too. ETC's patented one-handed zoom operation makes adjustments quick, simple and safe. Technicians can focus with one hand and hold the ladder with the other. And the lens tube door provides quick and easy access when you want to clean the lens assembly

Qty: 4

Condition: 2 New / 2 Good

ITEM# 1118

ETC Source Four PAR
ETC

ETC Source Four PAR
ETC

750W PAR Enhanced Aluminum with Stage Pin Connector. Source Four PARs stand out from the luminaire crowd with their rugged die-cast aluminum construction and acclaimed Source Four optical technology, superior brightness and energy savings. These models deliver a smooth even field, and at 575 watts are comparable to 1000W PAR64s -- while saving 40% on energy. For maximum brightness in wash lighting, these remarkable units are rated for the incomparable 750W HPL lamp.

Qty: 4

Condition: Good

ITEM# 1119

ETC LED50LT / 50 Degree Source Four LED Lens Tube
ETC

ETC LED50LT / 50 Degree Source Four LED Lens Tube
ETC

50 Degree Source Four LED Lens Tube. This is a 50 degree LED specific EDLT (Enhanced Definition Lens Tube) with lenses installed that's designed for the Source Four LED series of lights. This lens tube is built specifically to maximize the optics of the LED engine turning Source Fours into superior gobo projectors with remarkably crisp, high contrast imaging. This unit comes in a black finish.

Qty: 2

Condition: New

ITEM# 1120

Leprecon ULD-360 Duplex HP 6 Ch Dimmer
ULD

Leprecon ULD-360 Duplex HP 6 Ch Dimmer
ULD

When it comes to a dimmer pack you can trust, the ULD ranks as the industry leader in small portable treemount dimmer packs. Production and rental companies alike have come to rely on the ULD dimmers for a wide variety of uses. The solid design and construction assure that they will handle the most demanding conditions no matter what the environment. Schools and houses of worship will also appreciate the simple setup and rock solid performance.

Qty: 1

Condition: Good

ITEM# 1122

Leviton DDS 6000+
Leviton

Leviton DDS 6000+
Leviton

DDS 6000+ 4-channel, 1200W per channel (4800W max.) dimmer/relay system with DMX installed and dual 20A power supply cords.

Qty: 6

Condition: Good

ITEM# 1123

Altman Zip Strip 3-Circuit 30-Lamp
Altman

Altman Zip Strip 3-Circuit 30-Lamp
Altman

The Altman Zip Strip is a U.L. listed multi-lamp striplight using a wide range of 12 volt MR-16 tungsten halogen lamps. This luminaire is manufactured of die-cast, extruded and sheet aluminum in four standard lengths. These lengths are related to the number of color washes desired. Narrow spot, medium and wide flood lamps are efficiently incorporated into the Zip Strip without trapping appreciable light from these lamps. Since 10 lamps operate in series for each color circuit, lamp failure is noted by neon indicator lamps. Spring loaded lamp holders with push-on sockets provide secure positioning of the lamps to hold them in place while touring. This narrow luminaire allows it to be used on closely spaced battens or in tight spaces where a general wash of light from the top, side or bottom is desired. Each Zip Strip come with 2 C-Clamps each.

Qty: 14

Condition: Good

ITEM# 1124

Lighting Carts
APWI

Lighting Carts
APWI

Lighting Carts designed to hold Pre-Rigged Touring Light Ladders (ladders with lights already on them). Ideal for touring and quick load in and load outs. Carts are on heavy-duty casters and robustly made, ideal for any situation. Overall cart dimensions are 30"w x 84"l x 80"h. *Note: Image of the cart has 4 light ladders on it.

Qty: 2

Condition: Good

ITEM# 1125

Light Ladders
PRG

Light Ladders
PRG

Custom-made Lighting Ladders designed to quickly bolt and unbolt together for a touring situation. Segments are each 76"l x 26"w, resulting in a ladder over 12'tall when fully assembled. Segments are constructed from 1 1/2" schedule 40 steel pipe and are painted black.

Qty: 10

Condition: Very Good

ITEM# 1126

ProCan 20 Light MR16 Blinders
ProCan

ProCan 20 Light MR16 Blinders
ProCan

ProCan 20 Light MR16 blinders are audience blinders designed to wash a large area. They feature 20 @ 75w EYC 40 Deg, MR16 bulbs.

Qty: 2 Pairs

Condition: Good

ITEM# 1195

9D Power Fogger Industrial w/Air Option 220V
UltraTech

9D Power Fogger Industrial w/Air Option 220V
UltraTech

The UltraTech Power Fog Industrial 9D Fog Machine was created to eliminate the challenges of installing fog effects under stages or in close and confined spaces. This fog machine is suitable for situations where continuous output is required over longer durations. Built with our 1400-watt Heat Exchanger, the machine is rotated 90 degrees in the stainless-steel chassis to stand upright. Live event environments such as haunted houses, laser tag arenas, and recreational spaces like Escape Rooms are perfect venues for this model. Combined with the Mega Fog Burst attachment, sudden fog effects can be created on cue, adding to its versatility.

Qty: 1

Condition: Good

ITEM# 1133

Le Maitre Salamander Quad Pro
Le Maitre

Le Maitre Salamander Quad Pro
Le Maitre

Salamander Quad Pro is the latest flame unit from Le Maitre, following on from the successful Salamander and extending Le Maitre's flame family offering. The Salamander Quad Pro is a larger, more versatile system than the Salamander. A four canister system, it can be operated with each canister being fired independently and the option of multiple colors being loaded to provide a truly stunning visual display from a single machine. Firing the canisters sequentially can also be used to increase the duration of the effect, with up to 120 hits in total and each flame reaching around 12ft in height. Alternatively, all four canisters can be fired at the same time to produce a much bigger single flame reaching up to a spectacular 25ft!

Qty: 9

Condition: 1 New, 8 Very Good

ITEM# 1134

Sigma C02 Cryo Jet and Accessories
Sigma

Sigma C02 Cryo Jet and Accessories
Sigma

The Sigma Cryo Jet is a state-of-the-art cryogenic effect system capable of producing plumes of cryo fog up to 20 feet high using liquid CO2. The system is built from top grade industrial components which yields a very rugged device for reliable and repeatable operation. Its small size and adjustability allows it to be mounted in a wide variety of applications. Can be used with high pressure liquid CO2tanks or refrigerated liquid CO2 dewar tanks. Includes Cryo Jet w/ attached 6' Power Cord, 20' C02 Hose, C02 Nozzle, Mounting Plate, Mounting Clamp, JIC 90 Elbow, Tank Adapter (CGA-320), CGA-622 Adapter

Qty: 1

Condition: New

ITEM# 1136

Electro Kabuki Drops
Electro Kabuki

Electro Kabuki Drops
Electro Kabuki

Electro Kabuki uses clever electro-magnet technology and a unique hook design to make your reveal effect perfect. EK modules always activate first time, even with no load. Each unit is capable to drop up to 50Kg. These are the EK drops only with one (1) clamp.

Qty: 20

Condition: Very Good

ITEM# 1139

Electro Kabuki 3 Way Splitter Box
Electro Kabuki

Electro Kabuki 3 Way Splitter Box
Electro Kabuki

These splitter boxes are used to divide the Electro Kabuki control cable up to 3 ways, giving you plenty of flexibility to run your cables.

Qty: 14

Condition: Very Good

ITEM# 1140

FTSI 8 Channel Kabuki Release Controller
FTSI Automation

FTSI 8 Channel Kabuki Release Controller
FTSI Automation

FTSI Automation 8 Channel Kabuki Release Controller (brain only).

Qty: 2

Condition: Very Good

ITEM# 1141

American DJ SP4LED DMX Switch Pak
ADJ

American DJ SP4LED DMX Switch Pak
ADJ

The American DJ SP4LED is a 4-channel DMX Switch Pack designed to turn LED fixtures on and off using a universal DMX controller (sold separately). The unique DMX linking capability allows the user to daisy-chain up to 128 additional SP4LED's for astonishing extension possibilities. The SP4LED is a great on and off power switching choice for both permanent installations and mobile entertainers alike.

Qty: 2

Condition: Good

ITEM# 1142

Pyrotechnics Console

Pyrotechnics Console

90-channel pyrotechnics console complete with two distribution boxes and one 30-channel slave box.

Qty: 1

Condition: Good

ITEM# 1144

Barco HDF-W30 FLEX 30,000 Lumens WUXGA 3-Chip DLP projector with Standard FLEX Brightness (Body Only)
Barco

Barco HDF-W30 FLEX 30,000 Lumens WUXGA 3-Chip DLP projector with Standard FLEX Brightness (Body Only)
Barco

The HDF-W30 FLEX 30,000 Lumens WUXGA 3-Chip DLP Projector with Standard FLEX Brightness (Body Only) from Barco offers remarkable performance for large venues - even when there's lots of ambient light. Designed for life on the road, the rugged and modular projector is easy to install and service. And when equipped with a rental frame, it can easily be stacked or rigged. The projector offers FLEX brightness as standard. This provides the flexibility to tune the projector's brightness to a specific show - from 18,000 to 30,000 lumens in incremental steps of 2,000 lumens.

Qty: 2

Condition: Excellent

ITEM# 1145

Barco TLD+ 2.56-4.17 WUXGA/2.8-4.5 SXGA+
Barco

Barco TLD+ 2.56-4.17 WUXGA/2.8-4.5 SXGA+
Barco

The Barco TLD+ (2.8-4.5:1) Projector Lens is an accessory lens compatible with the FLM HD20, FLM R22+, Galaxy NW-12, Galaxy NW-7, HDX-W12, HDX-W14, NW-12, FLM HD14, FLM HD18, FLM R20+, NH-12, RLM R6+ Performer, SLM G10 Performer, SLM G5 Performer, SLM G8 Performer, SLM R10 Performer, SLM R12+ Performer, SLM R6 Performer, SLM R8 Performer and the SLM R9+ Performer.

Qty: 2

Condition: Excellent

ITEM# 1146

Chief Large Flat Panel Swing Arm Wall Mount
Chief

Chief Large Flat Panel Swing Arm Wall Mount
Chief

View large flat panel displays up to 71" or 200 lbs. from any angle with the Chief PDR-UB Universal Dual Swing-Arm Wall Mount. This custom mounting solution swings out and extends up to 37"" from the wall collapsing to just 2-7/8" when in home position. The PDR-UB is wall-mounted, rugged, versatile, and installer-friendly. It has vertical, lateral and rotational tilt tension adjustments. Flat panel screens can be mounted in either the landscape or portrait position.

Qty: 2

Condition: Excellent

ITEM# 1147

Peerless-AV ETA4X4 Full-Motion Wall Mount for 32" to 50"
Peerless-AV

Peerless-AV ETA4X4 Full-Motion Wall Mount for 32" to 50"
Peerless-AV

The Peerless-AV ETA4X4 Full-Motion Wall Mount is designed to mount flat-panel displays measuring 32" to 50" and has a maximum load capacity of 70lb. The mount extends from 2.0 to 14.1" from the wall, and provides ±15° tilt, 180° swivel, and ±5° roll adjustments.

Qty: 4

Condition: New

ITEM# 1148

Peerless-AV ETALU Full-Motion Wall Mount for 42
Peerless-AV

Peerless-AV ETALU Full-Motion Wall Mount for 42
Peerless-AV

The Peerless-AV ETALU Full-Motion Wall Mount is designed to mount flat-panel displays measuring 42" to 75" and has a maximum load capacity of 105 lb. The mount extends from 2.6" to 16.1"" from the wall and provides -5 to 15° tilt and ±90° pivot adjustments.

Qty: 2

Condition: New

ITEM# 1149

Panasonic PT-RZ120LBU 12,000-Lumen WUXGA DLP Projector (No Lens, Black)
Panasonic

Panasonic PT-RZ120LBU 12,000-Lumen WUXGA DLP Projector (No Lens, Black)
Panasonic

Brighten up your presentations with the black PT-RZ120LBU 12,600-Lumen WUXGA DLP Projector from Panasonic. Boasting a 12,000-lumen output and a 10,000:1 dynamic contrast, this projector is designed to overcome ambient light even in relatively bright rooms so that images are sharp and crisp all across. The projector's 1920 x 1200 WUXGA native resolution enables you to display detailed video, pictures, and data. Various interchangeable lenses are available separately for a variety of throw ratio choices. The PT-RZ120LBU features HDMI, VGA, 3G-SDI, DVI-D, and HDBaseT inputs, allowing for connectivity to nearly any device. The projector can be controlled via the included wireless/wired remote control, HDBaseT, or RS-232 with various control software options.

Qty: 1

Condition: New

ITEM# 1150

Panasonic ET-PKD130B Bracket Assembly for Projector Ceiling Mount Bracket
Panasonic

Panasonic ET-PKD130B Bracket Assembly for Projector Ceiling Mount Bracket
Panasonic

The Panasonic ET-PKD130B Bracket Assembly allows you to mount Panasonic projectors to a ceiling when used with a compatible ceiling mount bracket (available separately).

Qty: 1

Condition: New

ITEM# 1151

Barco Projectors Spare Lamps + Housing
Barco

Barco Projectors Spare Lamps + Housing
Barco

New lamps for the Barco HDF-W30 FLEX 30,000 Lumens projector with refurbished housing. Comes complete with a custom road case for transport.

Qty: 2

Condition: New

ITEM# 1152

Midas PRO2-CC-TP Tour Pack with 64-channel Digital Mixer and Flight Case
Midas

Midas PRO2-CC-TP Tour Pack with 64-channel Digital Mixer and Flight Case
Midas

64-channel Digital Mixer with 64 Input Channels, 27 Phase-coherent Mix Buses, 8 Onboard MIDAS Microphone Preamps, 16 Onboard Analog Outputs, 2 AES3 Inputs, 3 AES3 Outputs, and 96kHz 40-bit Floating-point Processing Throughout - Includes Flight Case and spare fader.

Qty: 2

Condition: Excellent

ITEM# 1153

Midas DL251 PRO SERIES 48-input / 16-output Stage Box
Midas

Midas DL251 PRO SERIES 48-input / 16-output Stage Box
Midas

The Midas DL251 is a 5U fixed-configuration I/O unit with 48 mic/line inputs and 16 mic/line outputs. Limited to analogue connections, the DL251 fives you a cost-effective solution if you don't need the flexibility of Midas modular I/O hardware. You get MIDI in, out and thru - plus one Ethernet control - standard. Three AES50 ports handle the (n+1) redundant digital audio interface. The DL251 can be switched between 96kHz and 48kHz from the front panel. A rear-panel "mute all outputs"" button makes for easy on stage re-patching. The unit is also equipped with dual redundant PSUs."

Qty: 2

Condition: Excellent

ITEM# 1154

SKB Cases Injection Molded 2U Studio Flyer Rack Case
SKB

SKB Cases Injection Molded 2U Studio Flyer Rack Case
SKB

The SKB-2U Studio Flyer Rack Case is a waterproof carry-on studio rack and combo laptop case. It can be used to transport sensitive equipment for production professionals on the go.

Qty: 3

Condition: Good

ITEM# 1155

Motu 16A Thunderbolt AVB and USB Audio Interface
Motu

Motu 16A Thunderbolt AVB and USB Audio Interface
Motu

If you're looking for a system that can meet the needs of a wide range of professional audio applications, then check out the MOTU 16A hybrid audio interface. With 16 balanced analog inputs and outputs, the 16A serves as an excellent conduit for your outboard microphone preamplifiers and other studio gear, and an additional 16 channels of ADAT I/O on optical ports provide you with plenty of expansion for multi-channel mic pres and more. Thanks to its Thunderbolt connectivity, latency is no hurdle for the 16A, though the onboard DSP mixer offers latency-free routing for monitoring and mixing. MOTU's AVB Ethernet lets you network multiple AVB interfaces to your 16A, and advanced capabilities even let you use it as a standalone, iPad-controlled digital mixer if you like.

Qty: 2

Condition: Excellent

ITEM# 1156

MOTU 828x 28x30 Thunderbolt / USB 2.0 Audio Interface
Motu

MOTU 828x 28x30 Thunderbolt / USB 2.0 Audio Interface
Motu

MOTU adds blazing-fast Thunderbolt connectivity to their audio interface lineup with the 828x! It's got USB too, and whichever way to you connect you'll have access to up to 28 inputs and 30 outputs - all in a single rack space. MOTU's acclaimed CueMix FX mixer software makes it easy to set up any routing configuration, and built-in DSP gives you awesome-sounding reverb, EQ, and compression. MOTU interfaces have always been popular at Sweetwater for their great sound, powerful flexibility, and outstanding reliability - and that's what you get with the MOTU 828x.

Qty: 2

Condition: Excellent

ITEM# 1157

Curtain / Traveler Track Channel

Curtain / Traveler Track Channel

Galvanized Traveler Track in various lengths:

4 @ 20'l
2 @ 12'l
4 @ 10'l

Condition: Fair

ITEM# 1160

Curtain / Traveler Track Splice Clamp

Curtain / Traveler Track Splice Clamp

Curtain Track Splicing Clamps join curtain/traveler track together to make one extended piece of track. Splice clamps are necessary to connect any 2 pieces of track and assuring proper alignment of the channels.

Qty: 6

Condition: Good

ITEM# 1163

Traveler Track Hardware

Traveler Track Hardware

Carriers, Hanging Clamps, Splice Clamps, etc.

Qty: 2

Condition: Fair

ITEM# 1164

EuroTruss RTS-8FT & 10FT
EuroTruss

EuroTruss RTS-8FT & 10FT
EuroTruss

Eurotruss RTS Truss is designed as a foldable and stackable truss system which carries the moving heads permanently. RTS Truss a versatile truss structure which can be used to carry moving heads. No more flight cases and truss in your storage nor in your truck. It saves not only trucking space but also guarantees less set up time and labor. The RTS has a open bottom and can be used as pre rig truss for automated lighting features as moving heads. The truss wagon has been designed to swing (fold) up and keep a minimum of height loss. That means with a wagon height of 680mm, by swinging (folding) it up you create a minimum extra height of 229mm on top of the pre rig truss. This is a not only a bonus at show time but also if you store or transport the RTS Trusses empty. The RTS Truss wagon is designed for severe transport and can take rough rides. The RTS Truss has additional receivers on top and on the bottom of the truss structure for stacking two RTS Trusses on top of each other. It can be stacked and pinned for safety while loading and unloading. The RTS Truss wagon is equipped with 4 pcs of 100mm castors and the side bars are positioned low enough to hide and protect the lens of the moving head. In case a light designer wants the castors to be taken off, this is possible as the castors are double plated and can be unscrewed and removed.

28 @ 8FT long
8 @ 10FT long

Condition: Excellent

ITEM# 1165

EuroTruss RTS-PLB Plate 36" x 32"
EuroTruss

EuroTruss RTS-PLB Plate 36" x 32"
EuroTruss

EuroTruss RTS-PLB Plate 36" x 32" x 1.18" Thick Steel Base Plate used to turn EuroTruss into Towers. Sipgoted End designed to couple with the base plate.

Qty: 8

Condition: Excellent

ITEM# 1167

Tomcat Box Truss - 20.5" x 20.5" x 10' - Silver - Plated
Tomcat

Tomcat Box Truss - 20.5" x 20.5" x 10' - Silver - Plated
Tomcat

Tomcat is one of the entertainment industry's most respected truss manufacturers, known worldwide for reliability, compatibility, and safety. All Tomcat truss products feature mill-certified materials created by AWS certified welders and each fabricated component of the truss has been designed by a professional engineer licensed in the USA. All Tomcat products are in compliance with ANSI code E1.2-2013.

Qty: 5

Condition: Very Good

ITEM# 1168

Tomcat Box Truss - 20.5" x 20.5" x 5' - Silver - Plated
Tomcat

Tomcat Box Truss - 20.5" x 20.5" x 5' - Silver - Plated
Tomcat

Tomcat is one of the entertainment industry's most respected truss manufacturers, known worldwide for reliability, compatibility, and safety. All Tomcat truss products feature mill-certified materials created by AWS certified welders and each fabricated component of the truss has been designed by a professional engineer licensed in the USA. All Tomcat products are in compliance with ANSI code E1.2-2013.

Qty: 2

Condition: Very Good

ITEM# 1169

Tomcat Box Truss - 12" x 12" x 2' - Silver - Plated
Tomcat

Tomcat Box Truss - 12" x 12" x 2' - Silver - Plated
Tomcat

Tomcat is one of the entertainment industry's most respected truss manufacturers, known worldwide for reliability, compatibility, and safety. All Tomcat truss products feature mill-certified materials created by AWS certified welders and each fabricated component of the truss has been designed by a professional engineer licensed in the USA. All Tomcat products are in compliance with ANSI code E1.2-2013.

Qty: 2

Condition: Very Good

ITEM# 1170

Extreme Structures and Fabrication Box Truss - 12" x 12" x 10' - Protective Bolt Plate Utility Truss - Silver
XSF

Extreme Structures and Fabrication Box Truss - 12" x 12" x 10' - Protective Bolt Plate Utility Truss - Silver
XSF

Protective Bolt Plate Truss provides a new engineered end plate design (patent pending) which includes circular ears at each corner that prevent damage to the chords from dropping or dragging. Aluminum Truss is often dropped on hard floors or unnecessarily damaged from dragging, costing users thousands of dollars. XSF has developed a way to eliminate this problem and extend the life of the truss.

Qty: 4

Condition: New

ITEM# 1171

Extreme Structures and Fabrication Utility Truss - 30" x 20.5" x 10' - Plated Utility Truss - Silver
XSF

Extreme Structures and Fabrication Utility Truss - 30" x 20.5" x 10' - Plated Utility Truss - Silver
XSF

The aluminum chords are 2" OD x 1/8" thick with 1" OD x 1/8" thick aluminum diagonals. The trusses are joined together with 5/8" steel bolts. Fabricated by AWS certified welders in the USA.

Qty: 5

Condition: Excellent

ITEM# 1172

Extreme Structures and Fabrication Utility Truss - 20.5" x 20.5" - Protective Bolt Plate Utility Truss - Silver
XSF

Extreme Structures and Fabrication Utility Truss - 20.5" x 20.5" - Protective Bolt Plate Utility Truss - Silver
XSF

1 @ 137.5"l
1 @ 133"l

Protective Bolt Plate Truss provides a new engineered end plate design (patent pending) which includes circular ears at each corner that prevent damage to the chords from dropping or dragging. Aluminum Truss is often dropped on hard floors or unnecessarily damaged from dragging, costing users thousands of dollars. XSF has developed a way to eliminate this problem and extend the life of the truss.

The aluminum chords are 2" OD x 1/8" thick with 1" OD x 1/8" thick aluminum diagonals. The trusses are joined together with 5/8" steel bolts. Fabricated by AWS certified welders in the USA.

Condition: Excellent

ITEM# 1174

Extreme Structures and Fabrication Utility Truss - 20.5" x 20.5" x 2' - Plated Utility Truss - Silver
XSF

Extreme Structures and Fabrication Utility Truss - 20.5" x 20.5" x 2' - Plated Utility Truss - Silver
XSF

The aluminum chords are 2" OD x 1/8" thick with 1" OD x 1/8" thick aluminum diagonals. The trusses are joined together with 5/8" steel bolts. Fabricated by AWS certified welders in the USA.

Qty: 1

Condition: New

ITEM# 1175

Extreme Structures and Fabrication Truss - 6" x 12" - Protective Bolt Plate Utility Truss - Silver
XSF

Extreme Structures and Fabrication Truss - 6" x 12" - Protective Bolt Plate Utility Truss - Silver
XSF

1 @ 137"l
9 @ 113.5"l
1 @ 92.5"l

The aluminum chords are 2" OD x 1/8" thick with 1"OD x 1/8" thick aluminum diagonals. The trusses are joined together with 5/8" steel bolts. Fabricated by AWS certified welders in the USA.

Protective Bolt Plate Truss provides a new engineered end plate design (patent pending) which includes circular ears at each corner that prevent damage to the chords from dropping or dragging. Aluminum Truss is often dropped on hard floors or unnecessarily damaged from dragging, costing users thousands of dollars. XSF has developed a way to eliminate this problem and extend the life of the truss.

Condition: New

ITEM# 1176

Truss Hanger Plate - 20.5" Truss - Silver
XSF

Truss Hanger Plate - 20.5" Truss - Silver
XSF

Truss Hanger Plate designed for a 20.5" x 20.5"" Box Truss. Plates are to be bolted between 2 pieces of 20" box truss and allows for a single point winch pickup connection.

Qty: 2

Condition: New

ITEM# 1177

Truss Hanger Plate - 6" x 12" Truss - Silver
XSF

Truss Hanger Plate - 6" x 12" Truss - Silver
XSF

Truss Hanger Plate designed for a 6" x 12" truss. Plates are to be bolted between 2 pieces of 6" x 12" box truss and allows for a single point winch pickup connection.

Qty: 13

Condition: New

ITEM# 1178

JTE General Purpose Truss (THOMAS TRUSS) 12" X 12" x 8' - Plated - Black
JTE / Thomas

JTE General Purpose Truss (THOMAS TRUSS) 12" X 12" x 8' - Plated - Black
JTE / Thomas

James Thomas Engineering truss manufacturer's General Purpose Truss, also simply known as Thomas Truss, is one of the most common truss products used in event production. General Purpose(GP) truss is constructed out of aluminum tubing and is designed for top performance at conferences, exhibitions, and small venue work. Suitable sleeve blocks and towers can be incorporated with this truss to build the JTE Ground Support System.

Qty: 5

Condition: Good

ITEM# 1179

JTE General Purpose Truss (THOMAS TRUSS) 5-Way Corner Block - 12" X 12" - Plated - Black
JTE / Thomas

JTE General Purpose Truss (THOMAS TRUSS) 5-Way Corner Block - 12" X 12" - Plated - Black
JTE / Thomas

James Thomas Engineering truss manufacturer's General Purpose Truss, also simply known as Thomas Truss, is one of the most common truss products used in event production. General Purpose(GP) truss is constructed out of aluminum tubing and is designed for top performance at conferences, exhibitions, and small venue work. Suitable sleeve blocks and towers can be incorporated with this truss to build the JTE Ground Support System.

Qty: 5

Condition: Good

ITEM# 1180

Assorted Truss Plates 36"
Misc.

Assorted Truss Plates 36"
Misc.

Assorted Truss Plates:

5 @ designed to fit 20" x 20" & 12" x 12" box truss
1 @ designed to fit 20" x 20" box truss only

Qty: 6

Condition: Good / Fair

ITEM# 1181

Metal Bird Trees
BELIEVE

Metal Bird Trees
BELIEVE

These trees were used for Criss Angel's bird act for his live shows. The Silver and Black model (photo# M20c) is a collapsible fire tree.

Sale Price:
a)$2,500.00
b)$1,500.00
c)$500.00

Qty: 3

Condition: Good

ITEM# 1196

Ornate Red Velour Show Curtain

Ornate Red Velour Show Curtain

Ornate Red Velour Show Curtain directly from the Lance Burton Theater at the Monte Carlo Hotel and Casino in Las Vegas. The traveler pieces are each 27'H x 27'W, resulting in a curtain over 27'H x 50'W to fill almost any proscenium opening. Also included are valance swags, proscenium legs, tassels and more!

Condition: Good

ITEM# 1198

BELIEVE Red Main Curtain

BELIEVE Red Main Curtain

Red Velour Show Curtain directly from the Criss Angel BELIEVE Theatre at the Luxor Hotel and Casino in Las Vegas. The main curtain panels are 30'H and when closed over 70'L. This curtain can be used as a traveler or rigged to swag open left and right. The full curtain comes complete with an additional, independent large swag (shown in the image in front of the main curtain panels). The curtain has a unique and elegant "patch work" design of various red velour.

Condition: Good

ITEM# 1199

Gold Austrian Curtain

Gold Austrian Curtain

Beautiful Gold Austrian Curtain once featured in "Zarkana". The complete curtain is 41'H x 58'W and is a shimmer gold fabric which reflects and takes light exceptionally well (the curtain appears to be dark blue in this photo). This curtain comes complete with its own road case!

ITEM# 1200

Red Velour Full-Stage Curtain

Red Velour Full-Stage Curtain

Red Velour Full-Stage Curtain directly from the Criss Angel Theatre at the Luxor Hotel and Casino in Las Vegas. The two curtain panels are each 35'H and when closed over 70'L. This curtain can be used as a traveler or rigged to swag open left and right. The curtain has a unique and elegant "patch work" design of various red velour.

Condition: Good

ITEM# 1201

Ornate Red Velour Opera Box Swags

Ornate Red Velour Opera Box Swags

Ornate Red Velour Opera Box Swags directly from the Lance Burton Theater at the Monte Carlo Hotel and Casino in Las Vegas. There are two complete sets of swags.

Condition: Good

ITEM# 1202

Black Velour Curtains

Black Velour Curtains

Assorted Black Velour Curtains including full stage travelers, legs, borders, tabs and cross overs. List of sizes are below:

11'w x 35'h
11.5'w x 26'h
11'w x 35'h
18'w x 9'h
12'w x 35'h
12'w x 35'h
33'w x 9'h
80'w x 25'h
11'w x 35'h
11.5'w x 26'h
11'w x 35'h
29'w x 25'h
20'w x 15'h
60'w x 8'h
32'w x 25'h (2)
12'w x 40'h
7'w x 30'h (4)
7'w x 30'h (4)
19'w x 28'h
60'w 8'h
60'w 8'h
19'w x 40'h
32'w x 25'h
14'w x 43'h
17'w x 11'h
5'w x 34'h
14'w x 39'h
5'w x 30'h
4'w x 31'h
12'w x 40'h
20'w x 20'h
18'w x 9'h
22'w x 15'h
24'w x 19'h
19'w x 14'h
4'w x 26'h
14.5'w x 18'h
14'w x 39'h
15'w x 21'h
14'w x 40'h

ITEM# 1203

Red Velour with Gold Fringe Curtains

Red Velour with Gold Fringe Curtains

Red Velour Curtains with Gold Fringe on bottom. Various sizes and makes available:

10'w x 16'h
12'w x 8'h
5'w x 21'h
2'3"w x 21.5'h
2'3"w x 21.6'h
2'3"w x 21'6"h
2'9"w x 19'h
2'9"w x 19'h


Condition: Good

ITEM# 1204

Black Duvetyne Masking Curtains

Black Duvetyne Masking Curtains

Black Duvetyne Masking Curtains of various sizes and makes. Perfect for large areas which need to be masked affordably! Sizes listed below:

39'w x 35'h
16'w x 19'h
80'w x 14'h
40'w x 37'h




ITEM# 1205

Cadillac Case
PRG

Cadillac Case
PRG

An industry standard road case, "Cadillac" cases are made to carry heavy loads and are the go-to cases for tours around the world. Truck pack sized, recessed hardware birch ply walls, painted black exterior coating, stack ability and heavy weight casters make these the ideal case to bring on the road!

Qty: 4

Condition: Very Good

ITEM# 1182

Road Case
ProPak

Road Case
ProPak

29w" x 47"l x 41.5h x (48"h with casters)

Qty: 1

Condition: Good

ITEM# 1183

Road Case
Encore Cases

Road Case
Encore Cases

54"w x 51.5"l x 12"h (no casters)

Qty: 1

Condition: Good

ITEM# 1184

Road Case
Calzone

Road Case
Calzone

Overall Dims: 44"w x 22.5"l x 26.6h (31.5"h with casters)
Inside Compartments: 18.5" x 21" (x2) and 5" x 21" (1)

Qty: 2

Condition: Good

ITEM# 1185

Road Case
ProPak

Road Case
ProPak

38.5"l x 50.5"w x 37.5"h (43.5"h with casters). Has 4 chain motor hooks on the lid.

Qty: 1

Condition: Very Good

ITEM# 1186

Road Case
Olympic

Road Case
Olympic

33"w x 44.5"l x 33.5"h (39"h with casters)

Qty: 1

Condition: Good

ITEM# 1187

Road Case
ProPak

Road Case
ProPak

30"w x 41"l x 31"h (36"h with casters)

Qty: 2

Condition: Good

ITEM# 1188

Tool Box - Road Case
Encore Cases

Tool Box - Road Case
Encore Cases

Exterior Dimensions - 45.5"l x 30"w x 38"h (44"h with casters). This touring tool box was once owned by Lance Burton and was used while he toured Japan.

Qty: 1

Condition: Good

ITEM# 1189

20 Bu - Canvas Wood Covered Truck
Steele

20 Bu - Canvas Wood Covered Truck
Steele

Canvas Wood Covered Truck, 20 Bu (45.5" x 36" x 39")

Qty: 1

Condition: Good

ITEM# 1191

6 Bu - Dandux Elevated Basket Truck
Dandux

6 Bu - Dandux Elevated Basket Truck
Dandux

Dandux Elevated Basket Bulk Truck, 6 Bu (30" x 20" x 20.5")

Qty: 1

Condition: Good

ITEM# 1192

Fiberboard Rolling Hamper

Fiberboard Rolling Hamper

21" x 21"" x 28" on Casters

Qty: 5

Condition: Good

ITEM# 1193

Rubbermaid 3717 Heavy Duty 18.3 CU Ft Bin
Rubbermaid

Rubbermaid 3717 Heavy Duty 18.3 CU Ft Bin
Rubbermaid

Rubbermaid 3717 Heavy Duty 18.3 CU Ft Bin - Max 900lbs

Qty: 1

Condition: Good

ITEM# 1194

CAT 2WP4500 Electric Pallet Truck
Caterpillar

CAT 2WP4500 Electric Pallet Truck
Caterpillar

Model: 2WP4500
Battery: 24 V
4500 lb capacity
The year 2009
Electric pallet truck with fork 27 x 48

This Caterpillar compact model is very convenient and perfect for use in a large or small warehouse. It has a multi-functional, ergonomically designed control handle protects the hands of your operators, while allowing them to lift, lower, and travel comfortably. It is practically brand new and hardly used.


Condition: Excellent

ITEM# 1206

Hummer Nail Bed
Criss Angel Studios

Hummer Nail Bed
Criss Angel Studios

In an episode of the Mindfreak television series, Criss laid down on this nailbed while a Hummer ran over his chest. A collector's piece displayed on two polished aluminum sawhorses, with a clear plexiglass protection cover over the sharp nails. This display was featured in Criss's Vegas show lobby for many years.

Condition: Very Good

ITEM# 1067

Sale Price: $3,000.00

Vic Firth Drumsticks Personalized to Criss Angel
The Avedis Zildjian Co. INC.

Vic Firth Drumsticks Personalized to Criss Angel
The Avedis Zildjian Co. INC.

These Vic Firth 5b drumsticks were custom made for Criss angel with his Mindfreak Logo.

Qty: 12 pairs per box

Condition: New in Box

ITEM# 1073

Sale Price: $100.00 ea.

Basketball Rim Used By Shaquille O'Neal

Basketball Rim Used By Shaquille O'Neal

Actual rim used by Shaquille O'Neal on Criss Angel's "BeLIEve" (Spike TV) show "Levitating Shaq" Season 1 Episode 5 This rim comes with a Letter of Authenticity.

Condition: Great

ITEM# 1074

Sale Price: $250.00

Metal Bird Trees
BELIEVE

Metal Bird Trees
BELIEVE

These trees were used for Criss Angel's bird act for his live shows. The Silver and Black model (photo# M20c) is a collapsible fire tree.

Sale Price:
a)$2,000.00
b)$1,500.00
c)$400.00

Qty: 3

Condition: Good

ITEM# 1081

Roberto Duran Signed Boxing Trunks Framed
Celebrity

Roberto Duran Signed Boxing Trunks Framed
Celebrity

Actual Boxing Trunks From the Legendary Roberto "Hands of Stone "Duran. Comes with JSA Authentication James Spence Authentication, LLC Certification Number: W124933

Condition: Mint

ITEM# 1085

Sale Price: $650.00

Kennel Escape
Mark Cannon / Cannon's Great Escapes

Kennel Escape
Mark Cannon / Cannon's Great Escapes

This escape caused both of Criss's eardrums to be blown as captured on an episode of Mindfreak. For the avid collector or the escape artist.

Condition: Good

ITEM# 1086

Sale Price: $2,000.00

Zig-Zag Illusion
Chalet

Zig-Zag Illusion
Chalet

A beautiful display piece from Criss's office which he shot with Shaunyl as a fun social media post. Criss performed the Zig-Zag at 14 and it always had a special place in his heart after seeing Doug Henning perform it. This is for the illusion worker that wants a classic piece of magic's history.

Condition: Very Good

ITEM# 1087

Sale Price: $3,000.00

Crystal Casket
Owens Magic

Crystal Casket
Owens Magic

A displayed illusion directly from Criss's personal office. Great for a production of a person or two. Comes with a road case.

Condition: Good

ITEM# 1089

Sale Price: $2,000.00

Wheel Chair Illusion
Joe Panero

Wheel Chair Illusion
Joe Panero

This is a great original piece featured in Criss's live Vegas show for a decade. An incredible way to appear, disappear or transform from one person to another. The chair electronically spins under your control. A great collectors piece and one-of-a-kind revelation.

Condition: Very Good

ITEM# 1090

Sale Price: $3750.00

Criss Angel Believe Frame

Criss Angel Believe Frame

Criss Angel Believe gold detailed show stage picture frame perfect to put your own photo inside! 5x7 Opening.

Qty: 712

Condition: New

ITEM# 1095

Sale Price: $15.00

Criss Angel Eyes Pint Glasses
Criss Angel

Criss Angel Eyes Pint Glasses
Criss Angel

Criss Angel Eyes logo pint glass. Get a case of Criss Angel pint glasses. 24 pint glasses to a case.

Qty: 10 cases

ITEM# 1107

Sale Price: $19.00 per case

2008 Lamborghini Mucielago 640

2008 Lamborghini Mucielago 640

An exact duplicate of the body and rims of Criss Angel's famous Lamborghini Mucielago 640 featured on episodes of Mindfreak and countless TV shows and magazines. It literally "appeared" every night in Criss Angel Mindfreak at Planet Hollywood in 2019.

*Please note: No engine or interior*

Condition: Good

ITEM# 1096

Sale Price: $89,000.00

Video(s):
https://youtu.be/fBA7CVlDSV4

2006 Harley Davidson FLHRS Road King Custom
Harley Davidson

2006 Harley Davidson FLHRS Road King Custom
Harley Davidson

Criss Angel's personal bike used on Mindfreak and on two charity runs. One benefiting children and the other with MMA Champ Randy Couture and his G.I. Foundation "Motorcycle Run "benefiting Military Veterans. Custom Rinehart exhaust pipes, custom ostrich skin leather seat.

Condition: Excellent

ITEM# 1099

Sale Price: $14500.00

2009 Believe Chopper
Big Bear Chopper

2009 Believe Chopper
Big Bear Chopper

This Big bear Chopper depicts scenes and characters of Criss Angel Believe Show in Las Vegas. Featured in the lobby of his theater, Mindfreak series and countless different media. Hand signed by Criss Angel with a video message personalized to you memorializing your purchase of Magic history.

Condition: Mint

ITEM# 1102

Sale Price: $24,000.00

2000 Loyal Dragster
Count's Kustoms

2000 Loyal Dragster
Count's Kustoms

This Criss Angel custom bike was created and fabricated in tribute to all of the "Loyal" fans worldwide for their support, love and inspiration. As seen displayed in the lobby of Mindfreak Live! or on his series. Hand signed by Criss Angel with a video message personalized to you memorializing your purchase of Magic history.

Condition: Mint

ITEM# 1103

Sale Price: $15,000.00